
TEREX TL 70
· Generation
Source and record
- Swiss type approval (TARGA)
Official source: ASTRA (Federal Roads Office)
Sources: TARGA and TAS (Type Approval System, the official successor system). Individual values on this page may come from either catalogue.
: Brand and model come from the official catalogue.
This page describes a vehicle configuration (type/variant/version), not an individual vehicle.
Identification
- ARBEITSKARREN
- Type-variant
- TL70S
- Model (source data)
- TL70
Classification
- 3619
- 44 kW
- Cylinders
- 4
- A
- Tyres/rims
- 12.5-18; 11x18 / 335/80R18; 11x18 / 365/70R18; 11x18 / 15.5/55R18; 11x1812.5-20; 11x20 / 335/80R20; 11x20Varianten im Abrollumfangbereich von 3044-3440mm (nach ETRTO) möglich
Field explanations
Official ASTRA meaning of this vehicle's source fields. Unknown, preserved, or not-yet-translated values stay visible and are never invented.
| Source field | Value | Unit | Status | ||
|---|---|---|---|---|---|
| body_code | 158 | ||||
| fuel_code | D |
Type approval
- Granted
- 29/05/2013
- Valid until
- 31/12/2012
- Source
- TG-Automobil.txt
This type approval covers several technical variants, shown separately below.
Emissions
Variant · h2
- Engine make
- DEUTZ
- Engine type
- D2011L04W (C3CI44)
- 4-Takt / 4 / Reihe
- h2 · Hydrostatic drive, 2 stages
- D02
- Exhaust code
- AFAJ
- 3619
- 44
- Homologation date
- 29/05/2013
Published source values
Shown exactly as published by the source and preserved for traceability.
- 2/4
- 210
- 1700
- ET-CO
- 990
- ET-NMHC
- 0
- ET-NOx
- 0
- ET-PA
- 0
- ET-PA-Exp
- 0
- ET-PM
- 211
- ET-T_IV-THC
- 0
- ET-T_VI-CO
- 0
- ET-T_VI-THC
- 0
- ET-THC
- 0
- ET-THC+NOx
- 4340
- 79.5
- 0
- 6200
- GeräuschCode
- GDAN
- 0
- 0
- 19.00
- 6200
- 2200
- ScCo2
- 0
- ScConsumption
- 0
- ScNh3
- 0
- ScNo2
- 0
- 71
- 1650
- TC_CO2
- 0
- TC_Consumption
- 0
- TC_NH3
- 0
- TC_NO2
- 0
- 30
- 20
- ZT-CO
- 0
- ZT-NMHC
- 0
- ZT-NOx
- 0
- ZT-PA
- 0
- ZT-PA-Exp
- 0
- ZT-PM
- 0
- ZT-T_VI-CO
- 0
- ZT-T_VI-THC
- 0
- ZT-THC
- 0
- ZT-THC+NOx
- 0
Variant · h4m
- Engine make
- DEUTZ
- Engine type
- D2011L04W (C3CI44)
- 4-Takt / 4 / Reihe
- h4m · Hydrostatic drive, 4 manually-shiftable stages
- D02
- Exhaust code
- AFAJ
- 3619
- 44
- Homologation date
- 29/05/2013
Published source values
Shown exactly as published by the source and preserved for traceability.
- 2/4
- 210
- 1700
- ET-CO
- 990
- ET-NMHC
- 0
- ET-NOx
- 0
- ET-PA
- 0
- ET-PA-Exp
- 0
- ET-PM
- 211
- ET-T_IV-THC
- 0
- ET-T_VI-CO
- 0
- ET-T_VI-THC
- 0
- ET-THC
- 0
- ET-THC+NOx
- 4340
- 79.5
- 0
- 6200
- GeräuschCode
- GDAN
- 0
- 0
- 19.00
- 6200
- 2200
- ScCo2
- 0
- ScConsumption
- 0
- ScNh3
- 0
- ScNo2
- 0
- 71
- 1650
- TC_CO2
- 0
- TC_Consumption
- 0
- TC_NH3
- 0
- TC_NO2
- 0
- 30
- 20
- ZT-CO
- 0
- ZT-NMHC
- 0
- ZT-NOx
- 0
- ZT-PA
- 0
- ZT-PA-Exp
- 0
- ZT-PM
- 0
- ZT-T_VI-CO
- 0
- ZT-T_VI-THC
- 0
- ZT-THC
- 0
- ZT-THC+NOx
- 0
Data sheet
Manufacturer & identification
- Manufacturer
- TEREX GmbH, D-74595 LANGENBURG
- Manufacturer's plate
- rechts, seitlich am Hinterwagen unterhalb Kabine
- Chassis number
- rechts, seitlich am Vorderwagen beim Knickgelenk
Chassis
- Axles/wheels
- 2/4
- Steering
- hydrostatisch; Knicklenkung
- Gearbox 1
- h2 · Hydrostatic drive, 2 stages
- Gearbox 2
- h4m · Hydrostatic drive, 4 manually-shiftable stages
- Ratio iA 1
- 19,00
- Ratio iA 2
- 19,00
- Assignment 1
- a
- Assignment 2
- a
- Max automatic speed (km/h)
- 20 – 30
- Service brake, line 1
- hydr., Scheibe auf Kardan, auf alle Räder,
- Service brake, line 2
- zusätzlich mit Inch-Ventil auf hydrostat.
- Service brake, line 3
- Antrieb
- Auxiliary brake, line 1
- mech., Scheibe auf Kardan, auf alle Räder
- Parking brake
- wie Hilfsbremse
Engine
- Engine make
- DEUTZ
- Engine type
- D2011L04W (C3CI44)
- Design type
- 4-Takt / 4 / Reihe
- Power at (rpm)
- 2200
- Max torque (Nm)
- 210
- Max torque at (rpm)
- 1700
- Exhaust gas treatment
- siehe Bemerkungen
- Muffler 1 (designation)
- siehe Bemerkungen
- Engine code
- D2011L04W
- Engine code location
- Plakette; oben auf Ventildeckel
- Noise damping, line 1
- Motorhaube teilweise mit Absorptions-
- Noise damping, line 2
- material belegt
Dimensions & body
- Total seats
- 1
- Number of doors
- 2
- Length (mm)
- 4650 – 6150
- Width (mm)
- 1780 – 1850
- Height (mm)
- 2470 – 2660
- Rear overhang (mm)
- 1150 – 1300
- Wheelbase 1-2 (mm)
- 2100
- Track axle 1 (mm)
- 1490 – 1530
- Track, axle 2 (mm)
- 1490 – 1530
Weights & trailer loads
- Unladen weight (kg)
- 5200 – 6200
- Guaranteed weight (kg)
- 6200
- Front axle rating (kg)
- 3800
- Rear axle rating (kg)
- 3800
- Roof load (kg)
- 0
- Braked trailer load (kg)
- 3500
- Unbraked trailer load (kg)
- 1000
- Braked trailer load, autom. (kg)
- 0
- Unbraked trailer load, autom. (kg)
- 0
- Total train weight (kg)
- 0
- Nose weight (kg)
- 250
Remarks
- Remark 1
- 02) A= kein Ausnahme-Fz: Distanz Mitte Lenkvorrichtung - vorderes Fahrzeugende < 3500 mm
- Remark 2
- B= Ausnahme-Fz: Distanz Mitte Lenkvorrichtung - vorderes Fahrzeugende > 3500 mm
- Remark 3
- 36) Anbringungshöhe der Abblendlichter und Abstand von vorn der Richtungsblinker v-seitlich technisch bedingt
- Remark 4
- 56) Anhängelast im Rahmen von Art. 77 VRV bei der Einzelabnahme festlegen
- Remark 6
- 30/31) ww. P 1/SMF-AR/2.7 oder HS 1/5761659747
- Remark 8
- Zuordnung
- Remark 9
- 18) h2 / h4m
- Remark 10
- 19) 20 km/h / 30 km/h
- Remark 11
- 68) Mindest-Index 130A4 / 130A6
- Remark 13
- Eintrag Fz-Ausweis:
- Remark 14
- A/B= 101 - Anzahl Plomben: 1 Anbringungsort: Volllastanschlagschraube
- Remark 15
- A/B= 118 - Höchstgeschwindigkeitszeichen 20 bzw. 30 km/h erforderlich
- Remark 16
- A/B= 138 - Schutzvorkehrung für folgende Fz-Teile erforderlich: über Zähne/Schürfkante der Ladeschaufel
- Remark 17
- A/B= 160 - Folgende Ausrüstungsteile müssen vor der Fahrt angebracht und/oder gesichert werden:
- Remark 18
- Sichern : Arbeitshydraulik in Kabine mit Kippschalter
- Remark 19
- Anbringen: Markierlichter und Richtungsblinker vorne an Ladeschaufel
- Remark 20
- (nur sofern Distanz Mitte Lenkvorrichtung bis vorderes Fahrzeugende >3000 mm)
- Remark 21
- B = 250 - Unbefristete Sonderbewilligung mit Gültigkeit für die ganze Schweiz und FL ...
- Remark 22
- Art der Ausnahme: Distanz Mitte Lenkvorrichtung - vorderes Fahrzeugende > 3500 mm
- Remark 23
- A/B= 251 - Schwierige Fahrmanöver ... grosse Seitenblickspiegel (mind. 300 cm2).
- Remark 24
- (nur sofern Distanz Mitte Lenkvorrichtung bis vorderes Fahrzeugende >3000 mm)
Additional fields (all source data)
Shown exactly as published by the source and preserved for traceability.
- 4460
- TEREX GmbH, D-74595 LANGENBURG
- rechts, seitlich am Hinterwagen unterhalb Kabine
- rechts, seitlich am Vorderwagen beim Knickgelenk
- 2/4
- hydrostatisch; Knicklenkung
- h2 · Hydrostatic drive, 2 stages
- h4m · Hydrostatic drive, 4 manually-shiftable stages
- 19,00
- 19,00
- a
- a
- 30
- 20
- 0
- 0
- hydr., Scheibe auf Kardan, auf alle Räder,
- zusätzlich mit Inch-Ventil auf hydrostat.
- Antrieb
- mech., Scheibe auf Kardan, auf alle Räder
- wie Hilfsbremse
- DEUTZ
- D2011L04W (C3CI44)
- 4-Takt / 4 / Reihe
- 2200
- 1700
- 210
- siehe Bemerkungen
- siehe Bemerkungen
- D2011L04W
- Plakette; oben auf Ventildeckel
- Motorhaube teilweise mit Absorptions-
- material belegt
- 0
- 1
- 0
- 1
- 2
- links+rechts
- 6150
- 4650
- 1850
- 1780
- 2660
- 2470
- 1300
- 1150
- 0
- 0
- 0
- 2100
- 0
- 0
- 0
- 0
- 1530
- 1490
- 1530
- 1490
- 0
- 0
- 0
- 0
- 6200
- 5200
- 0
- 6200
- 0
- 3800
- 0
- 3800
- 0
- 0
- 3500
- 0
- 1000
- 0
- 3500
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 250
- 0
- 0
- 02) A= kein Ausnahme-Fz: Distanz Mitte Lenkvorrichtung - vorderes Fahrzeugende < 3500 mm
- B= Ausnahme-Fz: Distanz Mitte Lenkvorrichtung - vorderes Fahrzeugende > 3500 mm
- 36) Anbringungshöhe der Abblendlichter und Abstand von vorn der Richtungsblinker v-seitlich technisch bedingt
- 56) Anhängelast im Rahmen von Art. 77 VRV bei der Einzelabnahme festlegen
- 30/31) ww. P 1/SMF-AR/2.7 oder HS 1/5761659747
- Zuordnung
- 18) h2 / h4m
- 19) 20 km/h / 30 km/h
- 68) Mindest-Index 130A4 / 130A6
- Eintrag Fz-Ausweis:
- A/B= 101 - Anzahl Plomben: 1 Anbringungsort: Volllastanschlagschraube
- A/B= 118 - Höchstgeschwindigkeitszeichen 20 bzw. 30 km/h erforderlich
- A/B= 138 - Schutzvorkehrung für folgende Fz-Teile erforderlich: über Zähne/Schürfkante der Ladeschaufel
- A/B= 160 - Folgende Ausrüstungsteile müssen vor der Fahrt angebracht und/oder gesichert werden:
- Sichern : Arbeitshydraulik in Kabine mit Kippschalter
- Anbringen: Markierlichter und Richtungsblinker vorne an Ladeschaufel
- (nur sofern Distanz Mitte Lenkvorrichtung bis vorderes Fahrzeugende >3000 mm)
- B = 250 - Unbefristete Sonderbewilligung mit Gültigkeit für die ganze Schweiz und FL ...
- Art der Ausnahme: Distanz Mitte Lenkvorrichtung - vorderes Fahrzeugende > 3500 mm
- A/B= 251 - Schwierige Fahrmanöver ... grosse Seitenblickspiegel (mind. 300 cm2).
- (nur sofern Distanz Mitte Lenkvorrichtung bis vorderes Fahrzeugende >3000 mm)