
TEREX TL 80
· Generation
Source and record
- Swiss type approval (TARGA)
Official source: ASTRA (Federal Roads Office)
Sources: TARGA and TAS (Type Approval System, the official successor system). Individual values on this page may come from either catalogue.
: Brand and model come from the official catalogue.
This page describes a vehicle configuration (type/variant/version), not an individual vehicle.
Identification
- ARBEITSKARREN
- Model (source data)
- TL80
Classification
- 3108
- 44 kW
- Cylinders
- 4
- A
- Tyres/rims
- 335/80R18; 11x18 / 12.5-18; 11x18 / 335/80R20; 11x20 / 12.5R20; 11x20 / 16/70 -20; 11x20365/70R18; 11x18 / 15.5/55R18; 11x18 / 365/80R20; 11x20 / 12.5-20; 11x20 / 405/70R20; 11x20,13x20405/70R18; 13x18 / / 375/75R20; 11x20 / 14.5-20; 11x20 /
Field explanations
Official ASTRA meaning of this vehicle's source fields. Unknown, preserved, or not-yet-translated values stay visible and are never invented.
| Source field | Value | Unit | Status | ||
|---|---|---|---|---|---|
| body_code | 158 | ||||
| fuel_code | D |
Type approval
- Granted
- 14/06/2007
- Valid until
- 31/12/2007
- Source
- TG-Automobil.txt
This type approval covers several technical variants, shown separately below.
Emissions
Variant · h2
- Engine make
- DEUTZ
- Engine type
- F4M2011(CE44/1)
- 4-Takt / 4 / Reihe
- h2 · Hydrostatic drive, 2 stages
- D01
- Exhaust code
- AFAG
- 3108
- 44
- Homologation date
- 14/06/2007
Published source values
Shown exactly as published by the source and preserved for traceability.
- 2/4
- 190
- 1700
- ET-CO
- 1950
- ET-NMHC
- 0
- ET-NOx
- 6120
- ET-PA
- 0
- ET-PA-Exp
- 0
- ET-PM
- 243
- ET-T_IV-THC
- 0
- ET-T_VI-CO
- 0
- ET-T_VI-THC
- 0
- ET-THC
- 370
- ET-THC+NOx
- 0
- 81
- 0
- 5400
- GeräuschCode
- GDAN
- 0
- 0
- 17.40
- 5400
- 2400
- ScCo2
- 0
- ScConsumption
- 0
- ScNh3
- 0
- ScNo2
- 0
- 68
- 1800
- TC_CO2
- 0
- TC_Consumption
- 0
- TC_NH3
- 0
- TC_NO2
- 0
- 30
- 20
- ZT-CO
- 0
- ZT-NMHC
- 0
- ZT-NOx
- 0
- ZT-PA
- 0
- ZT-PA-Exp
- 0
- ZT-PM
- 0
- ZT-T_VI-CO
- 0
- ZT-T_VI-THC
- 0
- ZT-THC
- 0
- ZT-THC+NOx
- 0
Variant · h4m
- Engine make
- DEUTZ
- Engine type
- F4M2011(CE44/1)
- 4-Takt / 4 / Reihe
- h4m · Hydrostatic drive, 4 manually-shiftable stages
- D01
- Exhaust code
- AFAG
- 3108
- 44
- Homologation date
- 14/06/2007
Published source values
Shown exactly as published by the source and preserved for traceability.
- 2/4
- 190
- 1700
- ET-CO
- 1950
- ET-NMHC
- 0
- ET-NOx
- 6120
- ET-PA
- 0
- ET-PA-Exp
- 0
- ET-PM
- 243
- ET-T_IV-THC
- 0
- ET-T_VI-CO
- 0
- ET-T_VI-THC
- 0
- ET-THC
- 370
- ET-THC+NOx
- 0
- 81
- 0
- 5400
- GeräuschCode
- GDAN
- 0
- 0
- 17.40
- 5400
- 2400
- ScCo2
- 0
- ScConsumption
- 0
- ScNh3
- 0
- ScNo2
- 0
- 68
- 1800
- TC_CO2
- 0
- TC_Consumption
- 0
- TC_NH3
- 0
- TC_NO2
- 0
- 30
- 20
- ZT-CO
- 0
- ZT-NMHC
- 0
- ZT-NOx
- 0
- ZT-PA
- 0
- ZT-PA-Exp
- 0
- ZT-PM
- 0
- ZT-T_VI-CO
- 0
- ZT-T_VI-THC
- 0
- ZT-THC
- 0
- ZT-THC+NOx
- 0
Data sheet
Manufacturer & identification
- Manufacturer
- TEREX GmbH, D-74595 LANGENBURG
- Manufacturer's plate
- rechts, seitlich am Hinterwagen unterhalb Kabine
- Chassis number
- rechts, seitlich am Vorderwagen beim Knickgelenk
Chassis
- Axles/wheels
- 2/4
- Steering
- hydrostatisch; Knicklenkung
- Gearbox 1
- h2 · Hydrostatic drive, 2 stages
- Gearbox 2
- h4m · Hydrostatic drive, 4 manually-shiftable stages
- Ratio iA 1
- 17,40
- Ratio iA 2
- 17,40
- Max automatic speed (km/h)
- 20 – 30
- Service brake, line 1
- hydr., Trommel auf Kardan, auf alle Räder,
- Service brake, line 2
- zusätzlich mit Inch-Ventil auf hydrostat.
- Service brake, line 3
- Antrieb
- Auxiliary brake, line 1
- mech., Trommel, auf Kardan
- Parking brake
- wie Hilfsbremse
Engine
- Engine make
- DEUTZ
- Engine type
- F4M2011(CE44/1)
- Design type
- 4-Takt / 4 / Reihe
- Power at (rpm)
- 2400
- Max torque (Nm)
- 190
- Max torque at (rpm)
- 1700
- Muffler 1 (type)
- HS ·
- Muffler 1 (designation)
- 1/5761659744 Austritt ach
- Engine code
- F4M2011
- Engine code location
- Plakette; oben auf Ventildeckel
- Noise damping, line 1
- Motorhaube teilweise mit Absorptionsmaterial
- Noise damping, line 2
- belegt
Dimensions & body
- Total seats
- 1
- Number of doors
- 2
- Length (mm)
- 4710 – 5430
- Width (mm)
- 1800 – 1880
- Height (mm)
- 2616 – 2710
- Rear overhang (mm)
- 1266
- Wheelbase 1-2 (mm)
- 2100
- Track axle 1 (mm)
- 1390 – 1470
- Track, axle 2 (mm)
- 1390 – 1470
Weights & trailer loads
- Unladen weight (kg)
- 4800 – 5400
- Guaranteed weight (kg)
- 5400
- Front axle rating (kg)
- 3500
- Rear axle rating (kg)
- 3500
- Roof load (kg)
- 0
- Braked trailer load (kg)
- 0
- Unbraked trailer load (kg)
- 0
- Braked trailer load, autom. (kg)
- 0
- Unbraked trailer load, autom. (kg)
- 0
- Total train weight (kg)
- 0
- Nose weight (kg)
- 0
Remarks
- Remark 1
- 02) A= kein Ausnahme-Fz: Abstand Lenkradmitte - vorderste Fz-Teile <3000mm
- Remark 2
- B= Ausnahme-Fahrzeug: Abstand Lenkradmitte - vorderste Fz-Teile >3000mm
- Remark 4
- 36) Anbringungshöhe der Abblendlichter und Abstand von vorn der Richtungsblinker v-seitlich technisch bedingt
- Remark 6
- 68) weitere Varianten im Abrollumfangbereich 3044 - 3440 mm nach ETRTO
- Remark 9
- Zuordnung
- Remark 10
- 18) h2 / h4m
- Remark 11
- 19) 20 km/h / 30 km/h
- Remark 12
- 68) Mindest-Index 127A4 / Mindest-Index 127A6
- Remark 15
- Eintrag Fz-Ausweis: (A/B: siehe Bemerkungen unter Rubrik 02)
- Remark 16
- A/B = 101 - Anzahl Plomben: 1 Anbringungsort: Volllastanschlagschraube
- Remark 17
- A/B = 118 - Geschwindigkeit max. 20 km/h oder 30 km/h. Höchstgeschwindigkeitszeichen erforderlich
- Remark 18
- A/B = 138 - Schutzvorkehrung für folgende Fz-Teile erforderlich: über Zähne/Schürfkante der Ladeschaufel
- Remark 19
- A/B = 160 - Folgende Ausrüstungsteile müssen vor der Fahrt angebracht und/oder gesichert werden:
- Remark 20
- A/B = Sichern : Arbeitshydraulik in Kabine mit Kippschalter, Hubzylinder mit Absperrhahn
- Remark 21
- B = Anbringen: Markierlichter und Richtungsblinker vorn an Ladeschaufel
- Remark 22
- B = 250 - Unbefristete Sonderbewilligung für die ganze Schweiz und FL; Ueberhang vorne
- Remark 23
- B = 251 - Schwierige Fahrmanöver müssen ..... grosse Seitenblickspiegel (mind. 300 cm2)
Additional fields (all source data)
Shown exactly as published by the source and preserved for traceability.
- 4460
- TEREX GmbH, D-74595 LANGENBURG
- rechts, seitlich am Hinterwagen unterhalb Kabine
- rechts, seitlich am Vorderwagen beim Knickgelenk
- 2/4
- hydrostatisch; Knicklenkung
- h2 · Hydrostatic drive, 2 stages
- h4m · Hydrostatic drive, 4 manually-shiftable stages
- 17,40
- 17,40
- 30
- 20
- 0
- 0
- hydr., Trommel auf Kardan, auf alle Räder,
- zusätzlich mit Inch-Ventil auf hydrostat.
- Antrieb
- mech., Trommel, auf Kardan
- wie Hilfsbremse
- DEUTZ
- F4M2011(CE44/1)
- 4-Takt / 4 / Reihe
- 2400
- 1700
- 190
- HS ·
- 1/5761659744 Austritt ach
- F4M2011
- Plakette; oben auf Ventildeckel
- Motorhaube teilweise mit Absorptionsmaterial
- belegt
- 0
- 1
- 0
- 1
- 2
- links+rechts
- 5430
- 4710
- 1880
- 1800
- 2710
- 2616
- 0
- 1266
- 0
- 0
- 0
- 2100
- 0
- 0
- 0
- 0
- 1470
- 1390
- 1470
- 1390
- 0
- 0
- 0
- 0
- 5400
- 4800
- 0
- 5400
- 0
- 3500
- 0
- 3500
- 0
- keine
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 02) A= kein Ausnahme-Fz: Abstand Lenkradmitte - vorderste Fz-Teile <3000mm
- B= Ausnahme-Fahrzeug: Abstand Lenkradmitte - vorderste Fz-Teile >3000mm
- 36) Anbringungshöhe der Abblendlichter und Abstand von vorn der Richtungsblinker v-seitlich technisch bedingt
- 68) weitere Varianten im Abrollumfangbereich 3044 - 3440 mm nach ETRTO
- Zuordnung
- 18) h2 / h4m
- 19) 20 km/h / 30 km/h
- 68) Mindest-Index 127A4 / Mindest-Index 127A6
- Eintrag Fz-Ausweis: (A/B: siehe Bemerkungen unter Rubrik 02)
- A/B = 101 - Anzahl Plomben: 1 Anbringungsort: Volllastanschlagschraube
- A/B = 118 - Geschwindigkeit max. 20 km/h oder 30 km/h. Höchstgeschwindigkeitszeichen erforderlich
- A/B = 138 - Schutzvorkehrung für folgende Fz-Teile erforderlich: über Zähne/Schürfkante der Ladeschaufel
- A/B = 160 - Folgende Ausrüstungsteile müssen vor der Fahrt angebracht und/oder gesichert werden:
- A/B = Sichern : Arbeitshydraulik in Kabine mit Kippschalter, Hubzylinder mit Absperrhahn
- B = Anbringen: Markierlichter und Richtungsblinker vorn an Ladeschaufel
- B = 250 - Unbefristete Sonderbewilligung für die ganze Schweiz und FL; Ueberhang vorne
- B = 251 - Schwierige Fahrmanöver müssen ..... grosse Seitenblickspiegel (mind. 300 cm2)