SCHAEFF TW75
· Generation
Source and record
- Swiss type approval (TARGA)
Official source: ASTRA (Federal Roads Office)
Sources: TARGA and TAS (Type Approval System, the official successor system). Individual values on this page may come from either catalogue.
: Brand and model come from the official catalogue.
This page describes a vehicle configuration (type/variant/version), not an individual vehicle.
Identification
- ARBEITSKARREN
- Type-variant
- TW75; -/-
Classification
- 2925
- 55.4 kW
- Cylinders
- 4
- A
- Tyres/rims
- ZW= 8.25-20 12PR; 7.0x20
Field explanations
Official ASTRA meaning of this vehicle's source fields. Unknown, preserved, or not-yet-translated values stay visible and are never invented.
| Source field | Value | Unit | Status | ||
|---|---|---|---|---|---|
| body_code | 245 | ||||
| fuel_code | D |
Type approval
- Granted
- 12/10/2017
- Valid until
- 31/12/2018
- Source
- TG-Automobil.txt
This type approval covers several technical variants, shown separately below.
Emissions
Variant · h2
- Engine make
- DEUTZ
- Engine type
- TCD2.9L4 (C4EI55D)
- 4-Takt / 4 / Reihe-T-DI
- h2 · Hydrostatic drive, 2 stages
- D03
- Exhaust code
- AFAP
- 2925
- Homologation date
- 12/10/2017
Published source values
Shown exactly as published by the source and preserved for traceability.
- KP ·
- 2/4
- 300
- 1600
- ET-CO
- 30
- ET-NMHC
- 0
- ET-NOx
- 3510
- ET-PA
- 0
- ET-PA-Exp
- 0
- ET-PM
- 6
- ET-T_IV-THC
- 0
- ET-T_VI-CO
- 0
- ET-T_VI-THC
- 0
- ET-THC
- 170
- ET-THC+NOx
- 0
- 77.5
- 0
- 8500
- GeräuschCode
- GDAN
- 0
- 0
- 20.66
- 8500
- 2200
- ScCo2
- 0
- ScConsumption
- 0
- ScNh3
- 0
- ScNo2
- 0
- 66
- 1650
- TC_CO2
- 0
- TC_Consumption
- 0
- TC_NH3
- 0
- TC_NO2
- 0
- 30
- 20
- ZT-CO
- 0
- ZT-NMHC
- 0
- ZT-NOx
- 0
- ZT-PA
- 0
- ZT-PA-Exp
- 0
- ZT-PM
- 0
- ZT-T_VI-CO
- 0
- ZT-T_VI-THC
- 0
- ZT-THC
- 0
- ZT-THC+NOx
- 0
Variant · h4m
- Engine make
- DEUTZ
- Engine type
- TCD2.9L4 (C4EI55D)
- 4-Takt / 4 / Reihe-T-DI
- h4m · Hydrostatic drive, 4 manually-shiftable stages
- D03
- Exhaust code
- AFAP
- 2925
- Homologation date
- 12/10/2017
Published source values
Shown exactly as published by the source and preserved for traceability.
- KP ·
- 2/4
- 300
- 1600
- ET-CO
- 30
- ET-NMHC
- 0
- ET-NOx
- 3510
- ET-PA
- 0
- ET-PA-Exp
- 0
- ET-PM
- 6
- ET-T_IV-THC
- 0
- ET-T_VI-CO
- 0
- ET-T_VI-THC
- 0
- ET-THC
- 170
- ET-THC+NOx
- 0
- 77.5
- 0
- 8500
- GeräuschCode
- GDAN
- 0
- 0
- 20.66
- 8500
- 2200
- ScCo2
- 0
- ScConsumption
- 0
- ScNh3
- 0
- ScNo2
- 0
- 66
- 1650
- TC_CO2
- 0
- TC_Consumption
- 0
- TC_NH3
- 0
- TC_NO2
- 0
- 30
- 20
- ZT-CO
- 0
- ZT-NMHC
- 0
- ZT-NOx
- 0
- ZT-PA
- 0
- ZT-PA-Exp
- 0
- ZT-PM
- 0
- ZT-T_VI-CO
- 0
- ZT-T_VI-THC
- 0
- ZT-THC
- 0
- ZT-THC+NOx
- 0
Data sheet
Manufacturer & identification
- Manufacturer
- YANMAR COMPACT GERMANY GmbH, D-74564 Crailsheim
- Manufacturer's plate
- rechts, vorne seitlich am Unterwagen
- Chassis number
- rechts, vorne oben auf Unterwagen
Chassis
- Axles/wheels
- 2/4
- Steering
- hydrostatisch
- Gearbox 1
- h2 · Hydrostatic drive, 2 stages
- Gearbox 2
- h4m · Hydrostatic drive, 4 manually-shiftable stages
- Ratio iA 1
- 20,66
- Ratio iA 2
- 20,66
- Assignment 1
- a
- Assignment 2
- a
- Max automatic speed (km/h)
- 20 – 30
- Service brake, line 1
- hydr., Hochdruck, Kreise-V/H,
- Service brake, line 2
- Mehrscheiben im Oelbad
- Auxiliary brake, line 1
- Kreise der Betriebsbremse
- Parking brake
- hydr., Federspeicher auf VR
Engine
- Engine make
- DEUTZ
- Engine type
- TCD2.9L4 (C4EI55D)
- Design type
- 4-Takt / 4 / Reihe-T-DI
- Power at (rpm)
- 2200
- Max torque (Nm)
- 300
- Max torque at (rpm)
- 1600
- Exhaust gas treatment
- 1/04600862 und 1/ww. 04604124, 04600864
- Engine code
- TCD2.9L4
- Engine code location
- Plakette; oben auf Ventildeckel
- Noise damping, line 1
- Motorhaube teilweise mit Absorptionsmaterial
- Noise damping, line 2
- belegt
Dimensions & body
- Total seats
- 1
- Number of doors
- 1
- Length (mm)
- 4960 – 5820
- Width (mm)
- 1990 – 2210
- Height (mm)
- 2890 – 3670
- Rear overhang (mm)
- 1073 – 1171
- Wheelbase 1-2 (mm)
- 2065
- Track axle 1 (mm)
- 1410 – 1700
- Track, axle 2 (mm)
- 1410 – 1700
Weights & trailer loads
- Unladen weight (kg)
- 7000 – 8500
- Guaranteed weight (kg)
- 8500
- Front axle rating (kg)
- 4000 – 4500
- Rear axle rating (kg)
- 5000 – 5500
- Roof load (kg)
- 0
- Braked trailer load (kg)
- 0
- Unbraked trailer load (kg)
- 0
- Braked trailer load, autom. (kg)
- 0
- Unbraked trailer load, autom. (kg)
- 0
- Total train weight (kg)
- 0
- Nose weight (kg)
- 0
Remarks
- Remark 1
- 02) A= kein Ausnahme-Fz: Abstand Lenkradmitte - vorderste Fz-Teile <3500mm
- Remark 2
- B= Ausnahme-Fahrzeug: Abstand Lenkradmitte - vorderste Fz-Teile >3500mm
- Remark 4
- 22) mech. Notlösung: Schrauben am Achsgehäuse
- Remark 6
- 36) zwei von vorn und hinten sichtbare Markierlichter erforderlich
- Remark 7
- (sofern Fz-Breite >2100mm; bei Fahrzeugabnahme festlegen/kontrollieren)
- Remark 9
- 38) Notausstieg: Frontfenster
- Remark 11
- Zuordnung
- Remark 12
- 18) h2 / h4m
- Remark 13
- 19) 20-25 km/h / 30 km/h
- Remark 16
- Eintrag Fz-Ausweis: (A/B: siehe Bemerkungen unter Rubrik 02
- Remark 17
- A/B = 104 - 1 Zusatzspiegel: nur bei Nichteinhaltung des 12m-Sichtkreises,
- Remark 18
- je nach Ausführung/Ausrüstung bei Einzelabnahme festlegen/kontrollieren
- Remark 19
- A/B = 118 - Geschwindigkeit max. 20-, 25-, bzw. 30 km/h. Höchstgeschwindigkeitszeichen erforderlich
- Remark 20
- A/B = 138 - Markierung für folgende Fahrzeugteile erforderlich: beidseitig vorne am Ausleger
- Remark 21
- A/B = 160 - Folgende Ausrüstungsteile müssen vor der Fahrt gesichert werden: Oberwagen,
- Remark 22
- Abstellstützen, Abstützteller (mit Ketten), Arbeitshydraulik mit Kippschalter
- Remark 23
- B = 250 - Unbefristete Sonderbewilligung für die ganze Schweiz und FL; Lenkradmitte-vorderste Fz-Teile >3500mm
Additional fields (all source data)
Shown exactly as published by the source and preserved for traceability.
- 4377
- YANMAR COMPACT GERMANY GmbH, D-74564 Crailsheim
- rechts, vorne seitlich am Unterwagen
- rechts, vorne oben auf Unterwagen
- 2/4
- hydrostatisch
- h2 · Hydrostatic drive, 2 stages
- h4m · Hydrostatic drive, 4 manually-shiftable stages
- 20,66
- 20,66
- a
- a
- 30
- 20
- 0
- 0
- hydr., Hochdruck, Kreise-V/H,
- Mehrscheiben im Oelbad
- Kreise der Betriebsbremse
- hydr., Federspeicher auf VR
- DEUTZ
- TCD2.9L4 (C4EI55D)
- 4-Takt / 4 / Reihe-T-DI
- 2200
- 1600
- 300
- 1/04600862 und 1/ww. 04604124, 04600864
- TCD2.9L4
- Plakette; oben auf Ventildeckel
- Motorhaube teilweise mit Absorptionsmaterial
- belegt
- 0
- 1
- 0
- 1
- 1
- links+rechts
- 5820
- 4960
- 2210
- 1990
- 3670
- 2890
- 1171
- 1073
- 0
- 0
- 0
- 2065
- 0
- 0
- 0
- 0
- 1700
- 1410
- 1700
- 1410
- 0
- 0
- 0
- 0
- 8500
- 7000
- 0
- 8500
- 5500
- 5000
- 4500
- 4000
- 0
- keine
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 02) A= kein Ausnahme-Fz: Abstand Lenkradmitte - vorderste Fz-Teile <3500mm
- B= Ausnahme-Fahrzeug: Abstand Lenkradmitte - vorderste Fz-Teile >3500mm
- 22) mech. Notlösung: Schrauben am Achsgehäuse
- 36) zwei von vorn und hinten sichtbare Markierlichter erforderlich
- (sofern Fz-Breite >2100mm; bei Fahrzeugabnahme festlegen/kontrollieren)
- 38) Notausstieg: Frontfenster
- Zuordnung
- 18) h2 / h4m
- 19) 20-25 km/h / 30 km/h
- Eintrag Fz-Ausweis: (A/B: siehe Bemerkungen unter Rubrik 02
- A/B = 104 - 1 Zusatzspiegel: nur bei Nichteinhaltung des 12m-Sichtkreises,
- je nach Ausführung/Ausrüstung bei Einzelabnahme festlegen/kontrollieren
- A/B = 118 - Geschwindigkeit max. 20-, 25-, bzw. 30 km/h. Höchstgeschwindigkeitszeichen erforderlich
- A/B = 138 - Markierung für folgende Fahrzeugteile erforderlich: beidseitig vorne am Ausleger
- A/B = 160 - Folgende Ausrüstungsteile müssen vor der Fahrt gesichert werden: Oberwagen,
- Abstellstützen, Abstützteller (mit Ketten), Arbeitshydraulik mit Kippschalter
- B = 250 - Unbefristete Sonderbewilligung für die ganze Schweiz und FL; Lenkradmitte-vorderste Fz-Teile >3500mm