MENZI MUCK A91 MOBIL
· Generation
Source and record
- Swiss type approval (TARGA)
Official source: ASTRA (Federal Roads Office)
Sources: TARGA and TAS (Type Approval System, the official successor system). Individual values on this page may come from either catalogue.
: Brand and model come from the official catalogue.
This page describes a vehicle configuration (type/variant/version), not an individual vehicle.
Identification
- ARBEITSKARREN
- Vehicle subkind
- Ausnahmefahrzeug
- Model (source data)
- Muck A91 Mobil
Classification
- 3990
- 89 kW
- Cylinders
- 4
- V oder Allrad, hinten ausschaltbar
- Tyres/rims
- v= 52x20.5-20 30PR 15.00x20 50x21.0-20 30PR 15.00x20 49x19.0-20 32PR 13.00x20550/80R23 184A8 16.00x23A 600/55-26.5 16PR 20.00x26.5 500/60-26.5 16PR 16.00x26.5h= 12.5/60-15 20PR 9.00 x14.5 3.00-15 18PR 8.00 x15 400/60-15.5 14PR 13.00x15.5
Field explanations
Official ASTRA meaning of this vehicle's source fields. Unknown, preserved, or not-yet-translated values stay visible and are never invented.
| Source field | Value | Unit | Status | ||
|---|---|---|---|---|---|
| body_code | 245 | ||||
| fuel_code | D |
Type approval
- Granted
- 11/01/2002
- Valid until
- 31/12/2002
- Extension
- 27/08/2002
- Source
- TG-Automobil.txt
This type approval covers several technical variants, shown separately below.
Emissions
Variant · h2
- Engine make
- PERKINS
- Engine type
- 1986/2100 (1004-40TW)
- 4-Takt / 4 / Reihe-T-DI
- h2 · Hydrostatic drive, 2 stages
- D00
- Exhaust code
- AFAB
- 3990
- 89
- Homologation date
- 11/01/2002
Published source values
Shown exactly as published by the source and preserved for traceability.
- 2/4
- 434
- 1500
- ET-CO
- 380
- ET-NMHC
- 0
- ET-NOx
- 8510
- ET-PA
- 0
- ET-PA-Exp
- 0
- ET-PM
- 226
- ET-T_IV-THC
- 0
- ET-T_VI-CO
- 0
- ET-T_VI-THC
- 0
- ET-THC
- 200
- ET-THC+NOx
- 0
- 81
- 11500
- 10000
- GeräuschCode
- GDAN
- 0
- 0
- 69.50
- 11500
- 2100
- ScCo2
- 0
- ScConsumption
- 0
- ScNh3
- 0
- ScNo2
- 0
- 77
- 1575
- TC_CO2
- 0
- TC_Consumption
- 0
- TC_NH3
- 0
- TC_NO2
- 0
- 12
- 8
- ZT-CO
- 0
- ZT-NMHC
- 0
- ZT-NOx
- 0
- ZT-PA
- 0
- ZT-PA-Exp
- 0
- ZT-PM
- 0
- ZT-T_VI-CO
- 0
- ZT-T_VI-THC
- 0
- ZT-THC
- 0
- ZT-THC+NOx
- 0
Variant · h1
- Engine make
- PERKINS
- Engine type
- 1986/2100 (1004-40TW)
- 4-Takt / 4 / Reihe-T-DI
- h1 · Hydrostatic drive, 1 stages
- D00
- Exhaust code
- AFAB
- 3990
- 89
- Homologation date
- 11/01/2002
Published source values
Shown exactly as published by the source and preserved for traceability.
- 2/4
- 434
- 1500
- ET-CO
- 380
- ET-NMHC
- 0
- ET-NOx
- 8510
- ET-PA
- 0
- ET-PA-Exp
- 0
- ET-PM
- 226
- ET-T_IV-THC
- 0
- ET-T_VI-CO
- 0
- ET-T_VI-THC
- 0
- ET-THC
- 200
- ET-THC+NOx
- 0
- 81
- 11500
- 10000
- GeräuschCode
- GDAN
- 0
- 0
- 69.50
- 11500
- 2100
- ScCo2
- 0
- ScConsumption
- 0
- ScNh3
- 0
- ScNo2
- 0
- 77
- 1575
- TC_CO2
- 0
- TC_Consumption
- 0
- TC_NH3
- 0
- TC_NO2
- 0
- 12
- 8
- ZT-CO
- 0
- ZT-NMHC
- 0
- ZT-NOx
- 0
- ZT-PA
- 0
- ZT-PA-Exp
- 0
- ZT-PM
- 0
- ZT-T_VI-CO
- 0
- ZT-T_VI-THC
- 0
- ZT-THC
- 0
- ZT-THC+NOx
- 0
Data sheet
Manufacturer & identification
- Manufacturer
- MENZI MUCK AG, 9464 Rüthi (Rheintal)
- Manufacturer's plate
- hinten, im Motorraum, an Trennwand oderlinks, in Kabine, beim Einstieg
- Chassis number
- rechts, vorn am Oberwagen unter Abdeckung
Chassis
- Axles/wheels
- 2/4
- Steering
- hydraulisch, Knicklenkung
- Gearbox 1
- h2 · Hydrostatic drive, 2 stages
- Gearbox 2
- h1 · Hydrostatic drive, 1 stages
- Ratio iA 1
- 69,50
- Ratio iA 2
- 69,50
- Max automatic speed (km/h)
- 8 – 12
- Service brake, line 1
- hydrostatischer Antrieb
- Auxiliary brake, line 1
- hydr. Federspeicher, Lamellen im Oelbad,
- Auxiliary brake, line 2
- auf Antriebswellen/VR
- Parking brake
- wie Hilfsbremse
Engine
- Engine make
- PERKINS
- Engine type
- 1986/2100 (1004-40TW)
- Design type
- 4-Takt / 4 / Reihe-T-DI
- Power at (rpm)
- 2100
- Max torque (Nm)
- 434
- Max torque at (rpm)
- 1500
- Muffler 1 (type)
- HS ·
- Muffler 1 (designation)
- 1/A91 Austritt ach
- Engine code
- AM
- Engine code location
- Plakette; rechts,vorne,überEinspritzpumpe oder links, hinten am Block
- Noise damping, line 1
- Heckdeckel, Abdeckhaube vorn und Frontblech,
- Noise damping, line 2
- Motorraumabdeckung oben sowie Seitendeckel
- Noise damping, line 3
- links teilweise mit Absorptionsmaterial
- Noise damping, line 4
- belegt
Dimensions & body
- Total seats
- 1
- Number of doors
- 1
- Length (mm)
- 6500
- Width (mm)
- 2400 – 2550
- Height (mm)
- 3900 – 4000
- Rear overhang (mm)
- 650 – 1400
- Wheelbase 1-2 (mm)
- 3470 – 4100
- Track axle 1 (mm)
- 1400 – 1800
- Track, axle 2 (mm)
- 2100 – 2250
Weights & trailer loads
- Unladen weight (kg)
- 9000 – 11500
- Guaranteed weight (kg)
- 10000 – 11500
- Front axle rating (kg)
- 22000
- Rear axle rating (kg)
- 10000
- Roof load (kg)
- 0
- Braked trailer load (kg)
- 0
- Unbraked trailer load (kg)
- 0
- Braked trailer load, autom. (kg)
- 0
- Unbraked trailer load, autom. (kg)
- 0
- Total train weight (kg)
- 0
- Nose weight (kg)
- 0
Remarks
- Remark 1
- Art der Ausnahme: Abstand Lenkradmitte-vorderste Fz.-Teile >3000mm; Allrad zus. = Breite
- Remark 3
- 17) Achsantrieb VR oder Allrad bei der Einzelabnahme im Prüfbericht vermerken
- Remark 5
- 36) Ausrüstung : Beleuchtung vorn umsteck- oder einklappbar, hinten ww. demontierbar
- Remark 6
- Notausstieg = Frontscheibe, rechtes Seitenfenster; können geöffnet werden
- Remark 8
- Abmessungen: mit Allradantrieb = Breite 2800mm, Spur 2520mm, Radstand 3800-4100mm
- Remark 10
- 52) 9000kg mit Standardlöffel Breite 600mm, VR-Antrieb
- Remark 15
- Eintrag Fz-Ausweis:
- Remark 16
- 101 - Anzahl Plomben: 1 Anbringungsort: Vollastanschlagschraube
- Remark 17
- 104 - 1 Zusatzspiegel erforderlich. Anbringungsort: auf der rechten Seite nach vorne gerichtet
- Remark 18
- 125 - Sonderbewilligung erforderlich (14-... grosse Seitenblickspiegel / 19-Markierlicht vorn am Ausleger)
- Remark 19
- 138 - Schutzvorkehrungen/Markierungen: hinten über Pranken
- Remark 20
- 160 - Ausrüstungsteile anbringen: die vorgeschriebene Beleuchtung/Richtungsblinker und zus.hintere Rückstrahler
- Remark 21
- Ausrüstungsteile sichern : Arbeitshydraulik in Kabine. Oberwagen. Abstellstützen einschwenken/einfahren.
- Remark 22
- Löffel einschwenken. Baggerarm auf Markierung stellen
Additional fields (all source data)
Shown exactly as published by the source and preserved for traceability.
- 2608
- MENZI MUCK AG, 9464 Rüthi (Rheintal)
- hinten, im Motorraum, an Trennwand oderlinks, in Kabine, beim Einstieg
- rechts, vorn am Oberwagen unter Abdeckung
- 2/4
- hydraulisch, Knicklenkung
- h2 · Hydrostatic drive, 2 stages
- h1 · Hydrostatic drive, 1 stages
- 69,50
- 69,50
- 12
- 8
- 0
- 0
- hydrostatischer Antrieb
- hydr. Federspeicher, Lamellen im Oelbad,
- auf Antriebswellen/VR
- wie Hilfsbremse
- PERKINS
- 1986/2100 (1004-40TW)
- 4-Takt / 4 / Reihe-T-DI
- 2100
- 1500
- 434
- HS ·
- 1/A91 Austritt ach
- AM
- Plakette; rechts,vorne,überEinspritzpumpe oder links, hinten am Block
- Heckdeckel, Abdeckhaube vorn und Frontblech,
- Motorraumabdeckung oben sowie Seitendeckel
- links teilweise mit Absorptionsmaterial
- belegt
- 0
- 1
- 0
- 1
- 1
- links+rechts
- 0
- 6500
- 2550
- 2400
- 4000
- 3900
- 1400
- 650
- 0
- 0
- 4100
- 3470
- 0
- 0
- 0
- 0
- 1800
- 1400
- 2250
- 2100
- 0
- 0
- 0
- 0
- 11500
- 9000
- 11500
- 10000
- 0
- 10000
- 0
- 22000
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- Art der Ausnahme: Abstand Lenkradmitte-vorderste Fz.-Teile >3000mm; Allrad zus. = Breite
- 17) Achsantrieb VR oder Allrad bei der Einzelabnahme im Prüfbericht vermerken
- 36) Ausrüstung : Beleuchtung vorn umsteck- oder einklappbar, hinten ww. demontierbar
- Notausstieg = Frontscheibe, rechtes Seitenfenster; können geöffnet werden
- Abmessungen: mit Allradantrieb = Breite 2800mm, Spur 2520mm, Radstand 3800-4100mm
- 52) 9000kg mit Standardlöffel Breite 600mm, VR-Antrieb
- Eintrag Fz-Ausweis:
- 101 - Anzahl Plomben: 1 Anbringungsort: Vollastanschlagschraube
- 104 - 1 Zusatzspiegel erforderlich. Anbringungsort: auf der rechten Seite nach vorne gerichtet
- 125 - Sonderbewilligung erforderlich (14-... grosse Seitenblickspiegel / 19-Markierlicht vorn am Ausleger)
- 138 - Schutzvorkehrungen/Markierungen: hinten über Pranken
- 160 - Ausrüstungsteile anbringen: die vorgeschriebene Beleuchtung/Richtungsblinker und zus.hintere Rückstrahler
- Ausrüstungsteile sichern : Arbeitshydraulik in Kabine. Oberwagen. Abstellstützen einschwenken/einfahren.
- Löffel einschwenken. Baggerarm auf Markierung stellen
- 11/34/36/74/75